Lightronics FXLD336ZM3I User Manual download pdf

Page 1 of 5

FXLD336ZM3I LED FIXTURE

Version 0.1 OWNERS MANUAL 02/21/2012

www.lightronic.com

Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

FEATURES AND SPECIFICATIONS

LEDS: 36 Three Watt LEDs (RGB 3 in 1)

Beam angle: 12º - 60º motorized zoom

Control system: DMX-512

DMX channels: 6

DMX connectors: 3 pin XLR

Voltage: 90 - 264 VAC 50/60Hz

Max power consumption: 140 Watts

Size: 10 7/8"D x 8 3/4"W x 8 3/4"H

Body material: Cast Aluminim

IP Rating: IP20

Body color: black

Weight: 12.1 lbs

DESCRIPTION

The FXLD336ZM3I is a PAR style RGB LED

lighting fixture with zoom capability. It is suitable for

stage, disco, night club, and other artistic applications.

It has several stand alone control modes, a master/slave

mode, and can operate via a DMX-512 external signal.

A double yoke enables it to be operated in several

positions.

INSTALLATION

LOCATION

The FXLD336ZM3I is intended for

INDOOR USE

ONLY

and is rated IP20.

Locate the unit in a well ventilated area away from

moisture and heat. Holes are provided on the yokes to

install a lighting bar pipe clamp. A safety cable should

also be used. Do not block any vent holes.

POWER CONNECTIONS

The FXLD336ZM3I has a line cord for connection to a

120 VAC, 15 Amp, 60Hz, grounded service.

The safety ground pin on the power cord must be used.

DMX CONNECTIONS

A system using DMX control should be connected as a

chain of devices. In other words the control signal

cable should proceed from the controller to the first

receiving device and then to others in a continuous

"daisy chain" fashion.

The fixture has a DMX IN and a DMX OUT connector

to be used to connect the chain. The control cable

should NOT be split into a multiple run star

arrangement with a cable running from the controller

directly to each receiving device pack.

DMX CONNECTOR PIN ASSIGNMENTS

There are two different connectors which can be used

for DMX control. They are both XLR type connectors.

Some units use 3 pin connectors. Others use 5 pin

connectors. The FXLD336ZM3I receives a DMX

signal on the 3 pin MALE connector on the back of the

unit. The 3 pin FEMALE connector is used to connect

the next DMX device on the control chain. If your

console uses a 5 pin connector you can make up an

adapter cable to accommodate this. The table below

shows the pin assignments for BOTH the 3 pin and 5

pin connectors.

IN # SIGNAL NAME

1 DMX COMMON

2 DMX DATA -

3 DMX DATA +

4 NOT USED

5 NOT USED

CAUTION

RISK OF ELECTRIC SHOCK

1 2 3 4 5 6

MENU NAVIGATION 4

Summary of Contents

Page 1

Page 1 of 5 FXLD336ZM3I LED FIXTURE Version 0.1 OWNERS MANUAL 02/21/2012 www.lig

Page 2

Page 2 of 5 FXLD336ZM3I LED FIXTURE Version 0.1 OWNERS MANUAL 02/21/2012 www.lig

Page 3

Page 3 of 5 FXLD336ZM3I LED FIXTURE Version 0.1 OWNERS MANUAL 02/21/2012 www.lig

Page 4 - MENU NAVIGATION

Page 4 of 5 FXLD336ZM3I LED FIXTURE Version 0.1 OWNERS MANUAL 02/21/2012 www.lig

Page 5

This product is warranted for a period of TWO YEARS from the date of purchase against defects in materials and workmanship. This warr

Page 6

www.lightronic.com Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588

Comments to this Manuals

No comments

Lightronics FXLD336ZM3I User Manual

Browse online or download User Manual for Lighting Lightronics FXLD336ZM3I. Lightronics FXLD336ZM3I User Manual [en] [es]

Summary of Contents

Comments to this Manuals